LED OCD Fuse List

LED OCD Mini for WPC, System 11, and Data East

F1 - 1.6A FB, 5x20mm, 32V minimum

Source

Note: Early boards were shipped with 1A. If this does not blow unexpectedly, it will better protect your LED OCD from damage in the case of a short. It is, however, safe to increase to 2.5A if you are having trouble with it blowing in normal operation.

LED OCD for Stern

F1 - 4A FB, 5x20mm, 32V minimum

Source

LED OCD for WPC (Rev 4 and earlier)

F1 - 4A FB, 5x20mm, 32V minimum

Source

LED OCD for Capcom

F1/F2 - 4A FB, 5x20mm, 32V minimum

Source

LED OCD for Spooky

F1 - 2.5A FB, 5x20mm, 32V minimum

Source

GI OCD for WPC

F1 - 10A SB, 6x32mm, 32V minimum

Source

F2-F6 - 2A SB, 5x20mm, 32V minimum

Source

Note: If you are having trouble with a single F2-F6 fuse blowing due to a bunch of incandescent bulbs in a string or a mod, you can increase one of those fuses to 4A SB. DO NOT increase the value of F1, however.

GI OCD for System 11

F1 - 2.5A FB, 5x20mm, 32V minimum

Source

GIzmo

F1 - 4A SB, 5x20mm, 32V minimum

Source

F2-F5 - 4A SB, 1206 SMD, 32V minimum

Source