The GI dimming feature of WPC pinball machines was designed around incandescent bulbs. LEDs are great for improving the lighting in machines, but due to their electrical characteristics, they have can have massive flicker issues due to the WPC dimming method. GI OCD allows you to customize how lamps are controlled in order to make them react more like incandescent bulbs, or just better in general.
|The Addams Family (Standard and Gold)||WPC89||Yes|
|Attack from Mars||WPC95||There are probably a couple of issues with Bill Ung's AFM Expansion Kit. I have one in my own machine, and it appears to be working correctly with the GI harness. The Super Jets feature also appeared to work, however, those lamps were lit more dimly than they should be. It works fine with his Mini-Saucer LED Kit, though.|
|Black Rose||WPC89||Should work, but we do not have test results.|
|Bram Stoker's Dracula||WPC89||Yes|
|Cactus Canyon||WPC95||Probably will not work quite right with Cactus Canyon Continued. Should work if the game is stock, but we do not have test results.|
|The Championship Pub||WPC95||Yes|
|Congo||WPC95||Should work, but we do not have test results.|
|Corvette||WPC89||Should work, but we do not have test results.|
|Creature from the Black Lagoon||WPC89||Chase Lamp Board will remain solidly lit and would require modification to work properly.|
|Fish Tales||WPC89||Should work, but we do not have test results.|
|The Flintstones||WPC89||Should work, but we do not have test results.|
|Funhouse||WPC89||Customer reports that the board works properly, but the mechanical fit is extremely tight.|
|The Getaway: High Speed II||WPC89||Yes|
|Gilligan's Island||WPC89||Should work, but we do not have test results.|
|Harley-Davidson||WPC89||Should work, but we do not have test results.|
|Hurricane||WPC89||Should work, but we do not have test results.|
|Indiana Jones: The Pinball Adventure||WPC89||Should work, but we do not have test results.|
|Indianapolis 500||WPC89||Should work, but we do not have test results.|
|Jack*Bot||WPC89||Should work, but we do not have test results.|
|Judge Dredd||WPC89||Should work, but we do not have test results.|
|Junk Yard||WPC95||Should work, but we do not have test results.|
|The Machine: Bride of Pin*Bot||WPC89||The helmet lights on Bride of Pinbot are not controlled by GI, but instead by a separate Chase board. GI OCD will not affect them at all; neither positively or negatively. If you choose to leave incandescent bulbs in the helmet, you will at minimum need to increase the value of the F3 fuse. We do not recommend this, but if you choose to, please keep an eye on how much heat is being generated in the drive and bridge transistors.|
|No Fear: Dangerous Sports||WPC89||Yes|
|No Good Gofers||WPC95||No Good Gofers requires a different ribbon cable due to the auxiliary 8-driver PCB. Please notify us when ordering so that we can supply an appropriate cable.|
|Party Zone||WPC89||Should work, but we do not have test results.|
|Popeye Saves The Earth||WPC89||Should work, but we do not have test results.|
|Red & Ted Road Show||WPC89||Should work, but we do not have test results.|
|Safecracker||WPC95||Should work, but we do not have test results. This would probably be a very tight fit, if it would work at all.|
|Star Trek: The Next Generation||WPC89||Yes|
|Tales of the Arabian Nights||WPC95||Yes|
|Terminator 2: Judgement Day||WPC89||Should work, but we do not have test results.|
|Theatre of Magic||WPC89||Yes|
|Twilight Zone||WPC89||The PinballLizard clock board has LEDs installed in reverse polarity as to what the GI OCD needs. These LEDs would have to be reversed to work properly. According to other reports I have had, Ingo's clock board does not have this problem, and it will work fine without modification.|
|WHO Dunnit||WPC89||Should work, but we do not have test results.|
|World Cup Soccer||WPC89||Yes|
For example videos, see the media page.
GI OCD is interchangeable between WPC95 and WPC89 games. The only difference between the two selections available is the default configuration that is loaded on the board when it is shipped. You can still use either kit in either type of game, but you will need to reconfigure the board using the PC software if you do not choose the configuration to match your game.
If you would rather not make holes in your game's backbox, you have the option of 3D printing a bracket and installing as described here. If you do not have access to a 3D printer, you can also purchase the bracket as an add-on. Keep in mind that is not required for installation. Orders including brackets may take a day or two longer to ship due to the time required to print the brackets.
This product may not work well with "special" bulbs such as blinkers, color changers, etc. The most common result is that they do not blink like they should.
Some games may have additional circuitry that may not be compatible. For example, the Creature from the Black Lagoon chase lamp board needs modifications to work correctly. If you encounter a game that it does not work properly with, I have no problem accepting returns, but please do not order if you are not comfortable with this possibility.
We have historically included a mini-USB cable that can be used to connect to a PC for configuration. We are increasingly hearing comments that this is not necessary to include, so I am going to remove the mini-USB cable from the kit. Until I run out, you can request a cable in the comments of your order.
Alternately, you can use a standard mini-USB cable that you already have or can get inexpensively from many different retailers.
For more information, read the FAQ.
This product was added to our catalog on Sunday 08 May, 2016.